Well Completion Waste Treatment Technology



For the environmental friendly treatment of well completion waste, we provide the integrated well completion and workover waste treatment technology of "oil removal + viscosity reduction and destabilization + solid-liquid separation + reuse", and its technical capabilities can cover operations in offshore oilfields and onshore oilfields need.

Features:

In-situ disposal to reduce waste transportation volume and end disposal pressure;

Customized treatment process design, suitable for a variety of well completion fluids systems;

Recovery of liquid phase can be repeated use

Auxiliary processing equipment - degreasing centrifuge.




The degreasing centrifuge has a high separation factor, which can effectively separate oil and water of oil-containing completion and workover fluids.

Features:

High-efficiency;

Skid mounted;

Run steadily;

Easy to handle;

Technical parameters:    

Item Technical Parameters
Effective bowl diameter (mm) 450
Operation bowl length (mm) 2000
Maximum speed (r/min) 3800
Operation speed (r/min) ≤3200
G-Force 3635
Differential speed (r/min) ≤50
Maximum capacity (m3/h) 10
Dimensions: L×W×H (mm) 3960×1100×1476
Weight (kg) 4000

Auxiliary treatment equipment-ultrafiltration equipment




Our techonology harbors ultrafiltration membrane filtration as a three-stage separation equipment, with the features of higher filtering efficiency, stronger anti-pollution ability and easier to clean.

Features:

Acid and alkali resistance, bacteria resistance, oil pollution resistance;

Small occupation;

High mechanical strength, good regeneration performance, long service life;

Technical parameters:    

Item Technical Parameters
Water flux (m3/h) 20
Operating pH range 2-12
Operating temperature (℃) 1-45
Maximum inflow pressure (MPa) 0.5
Maximum backwash pressure (MPa) 0.25
Membrane inner/outer diameter (mm) 0.7/1.3